Description

Used Coiled Tubing Unit. C-TEC Injector with picker,

With a Cat C15, 525hp motor with 218,668 Km and 17,751 hours, an 18 speed Eaton/Fuller transmission, 69,000# rears. C-TEC Coil Tubing Unit and Injector system, a North Western 600 CFM pressure system with 1,292 hours and a Fassi 170 picker unit.
There are all new tires on this vehicle (14) with less than 10% wear.
The oil is changed every 250 to 300 hours with full synthetic 0-40 oil and a full maintenance check is carried out at that time for minor faults. It has an up-to-date Alberta safety as well as Pressure system safeties.
This vehicle is stocked with approximately $80,000 worth of tools, fittings and connectors of various sizes. Tools included in this report are wrenches of various sizes, sockets sets of various sizes, fittings and sundry other tools associated with this type of operation including a new Class II BOP system and a new high pressure stripper.
Injector – 30,000lb rated push/pull (have pulled upwards of 50k)
Reel – Aprox 2000m 1.75″ coil, 2500m 1.50″
BOP – Interchangeable w/ 2000lb KR3 4.5″ hammer union, or 5K high press stripper w/ 5.5″ bowen union
Chains – Cross hatched 1.75″, cross hatched combi 3/4″-1.25″, 1.50″ smooth.
Weights – Complete unit with 1800m of 1.75″ runs down the road at permitted 9600kg front, 25000kg rear.